There are many reasons for the oil leakage of Roots blower. First, solve the oil seal problem. Replace the oil rod of the leaking Roots blower and see the effect. The oil rod of Roots blower must be high temperature. Otherwise, the effect of oil leakage treatment is not good.
Secondly, check the wear of the main shaft. If there is serious wear and roughness, it is better to work professionally. Apply oil on the last oil seal and grease on the inner diameter of the oil seal for installation. Initial operation can also prevent oil lubrication. In order to prevent the collision of the main shaft, many enterprises do not notice whether the main shaft processed by workers is collided in the process of processing the main shaft. When the main shaft encounters one or more concave and convex points, use the best oil stick to leak oil or soak oil along the concave and convex points.
During the operation of Roots blower, confirm whether there is enough lubricating oil. Insufficient lubricating oil will lead to excessive meshing of gears and direct damage of gears. In order to ensure sufficient lubricating oil, add lubricating oil continuously to the leaking Roots blower to avoid too little lubricating oil. This may lead to excessive consumption of lubricating oil.
1. There is dirt in Roots blower
There are many impurities in the impeller of Roots blower. Too small spacing of Roots blower will affect the normal operation of the blower, and the exhaust of the blower is not smooth. Excessive vibration of Roots blower will affect the compactness of the overall structure of Roots blower, which will lead to oil leakage of Roots blower for a long time.
2. People inject too much lubricating oil. We must inject lubricating oil according to the standard. Do not inject too much lubricating oil.
3. The sealing processing of fuel tank end face is unqualified
The quality problem of the fuel tank may lead to cracks in the fuel tank, or some external forces may lead to limited damage, resulting in oil leakage of Roots blower.
4. The bearing is excessively worn
The bearing is excessively worn, the gap becomes larger, and oil leakage occurs. There is another reason for the oil leakage of Roots blower. The main reason is the quality problem and unscientific operation of Roots blower.
I believe that after reading the above contents, you should also have some understanding of the basic analysis of the causes of Roots blower oil leakage. I hope it will be helpful to you.
Text label: Roots blower
Article address: //wuhanzhcs.com/html/news/n02/86.html
