Pay attention to the following 6 points when installing the V-belt of Roots blower!

The belt of Roots blower is easy to install, and the following points should be noted during installation:

1. When installing the belt, the grooved pulleys installed on the two pulleys should be aligned and not on different horizontal planes;

2. When installing the belt pulley, pay attention to the rationality of force, and do not pry with force to avoid damage to the belt pulley;

3. Because the belt is a consumable accessory, the belt must not contact corrosive things to avoid damage to the belt;

4. Due to the belt material of Roots blower, long-term use and exposure to the sun will erode it and cause aging. Therefore, the belt should not be exposed to the sun during installation and use;

5. Generally speaking, the finished Roots blower belt will be distributed after installation. If you install the belt by yourself, pay attention to the position of the belt and the protective cover to avoid too close distance, which will cause mutual friction loss between the two;

6. If our Roots blower is equipped with multiple belts, they should be replaced at the same time in case of damage. Do not choose the old and new combination for installation and use. The elasticity of the new and old belts will be different, and the new and old combination will easily lead to uneven stress on the new and old belts.

Summary: The installation method of Roots blower belt is relatively simple. After a simple understanding, it can be installed independently. If you have any problems when purchasing, you can contact our official customer service hotline 0531-83663588