Online Message | contact us | chinese | Welcome to the official website of Shandong Xinqianshun Machinery Co., Ltd!
 Roots blower manufacturer
National hotline 0531-83663588
Current location: home page > news information > Company News

What are the causes of serious overheating of Roots blower?

Source: Roots blower manufacturer Published on: November 25th, 2021 Hits:
The causes of high heating temperature of roots blower are as follows:

 

1. There is too much oil, too thick and too dirty in the oil tank of Roots blower;

 

2. Roots blower filter or muffler is blocked;

 

3. The pressure of roots blower is higher than the specified value;
 

 Roots blower

4. The impeller of Roots blower is excessively worn with large clearance;

 

5. Poor ventilation of roots blower and high indoor temperature cause high inlet temperature;

 

6. The running speed of Roots blower is too low, and the belt slips.

 

Treatment Method for Excessive Temperature of Roots Blower Body _Roots blower

 

1. Roots blower reduces oil level or carries oil;

 

2. Roots blower to remove blockage;

 

3. Roots blower reduces the pressure difference through the blower;
 

 Roots blower

4. Repair clearance of roots blower;
 
5. Roots blower is provided with a vent to reduce the room temperature;

 

6. The rotating speed should be increased to prevent the belt from slipping

 

If any abnormality is found on roots blower, it shall be handled in time to ensure the normal operation of the equipment and improve the service life of the equipment.
Word tag: Roots blower
Article address: //wuhanzhcs.com/html/news/n01/860.html


Xinqianshun's latest products

 Three blade roots blower
 Rotary blower
 Roots blower with direct drive
 Dense Roots blower
 Three leaf Roots blower (belt type)

Random articles

Latest news articles