Causes and measures for high noise of roots blower:

What Xinqianshun Machinery Department shared in this chapter is the phenomenon of high noise during the use of Roots blower, the reasons for this phenomenon and the solutions

Let's start with the possible reasons:

1. Pressure rise due to pipe blockage

2. When the belt cover is installed, it will cause vibration

3. The motor bearing is worn

4. Abrasion caused by dust entering the fan

5. No lubricating oil

6. Poor lubrication

7. B-type pulley is loose

8. V-belt slipping

terms of settlement:

1. Clean or replace the pipeline

2. Reinstall the belt cover

3. Replace the bearing

4. Disassemble and repair the fan

5. Check the oil supply system

6. Clean the oil drip nozzle and oil filter

7. Tighten the jackscrew

8. Adjust the belt tension

The above is the reason and solution for the high noise of the small knitting machine. Pay attention to the small knitting machine and let you know more about Roots blower