What are the correct installation methods of Roots blower?

What are the correct installation methods of Roots blower? First Installation of power cord, How to select the correct installation platform, For the installed switch, Xinqianshun will prepare the following detailed introduction for you.

For many people, the Roots blower is easy to purchase, but not easy to install. The correct installation method of Roots blower can help us save many unnecessary troubles, and at the same time let us better understand the product. How to install it correctly? You can see the following suggestions!

1. Installation of power cord

First of all, let's start from the most basic point. When we wire the purchased Roots blower, we should strictly follow the rated working voltage of the blower, use the voltage of 380V instead of 220V. This is something that you must remember. Another situation is that the wires must not be connected reversely. If they are connected reversely, the fan will reverse,.

2. How to select the correct installation platform

Generally speaking, the installation of Roots blower can be divided into two types, indoor installation and outdoor installation, each of which has its own method. First, let's talk about the indoor installation, which can be installed on the ground or on a platform. The specific situation depends on the site conditions when we install Roots blower. If it is outdoor, it is better to install it on the platform, Because there will often be erosion on the ground, affecting the normal operation of our Roots blower

3. Installed switch Confirm submission

According to experience, the switch should be set near the fan. On the one hand, it is easy to control, on the other hand, it can also handle some emergency situations, because if it is too far away, once there is a fault, the longer the delay, the greater the damage to Roots fan. Therefore, it is recommended to set the switch near the fan.

The correct installation of Roots blower can help us run the equipment better!