Online Message | contact us | chinese | Welcome to the official website of Shandong Xinqianshun Machinery Co., Ltd!
Roots blower manufacturer
National hotline 0531-83663588
Current location: home page > news information > Roots blower information

The Roots blower manufacturer explained that the causes and solutions of the high temperature of Roots blower:

Source: Roots blower manufacturer Published on: March 5, 2022 Hits:

The causes of high temperature of Roots blower include:

Roots Blower

(1) The running speed is too low, and the belt slips.

(2) The pressure is higher than the specified value;

(3) Poor ventilation and high indoor temperature cause high inlet temperature;

(4) There is too much oil, too thick and dirty in the oil tank;

(5) The filter or muffler is blocked;

(6) The impeller is excessively worn with large clearance; The temperature of Roots blower is too high

terms of settlement Concise ：

(1) Increase the rotating speed to prevent the belt from slipping.

(2) Reduce the pressure difference through the blower;

(3) Lower the oil level or carry oil;

(4) Open vents to reduce room temperature;

(5) Remove the blockage;

(6) Repair clearance;

Roots blower with direct drive

The Roots blower manufacturer explained that the causes and solutions of the high temperature of Roots blower:

  Roots Blower High pressure Roots blower is the most practical blower at present. It can operate independently or in series, which makes high pressure Roots blower and Roots blower have strong adaptability, so it is widely used in various occasions requiring blowing and air exchange. The precision of high pressure Roots blower and Roots blower determines that we should pay close attention to its operation when it operates. Once there is an operation fault, it will be handled in time. If it is not handled in time, it will cause no small damage to Roots blower. During the operation of high-pressure Roots blower and Roots blower, the fan temperature is sometimes too high. In view of this situation, we should analyze it in the following aspects:

1. Check the oil tank of roots blower or high-pressure roots blower. Too much oil, too thick, or too many impurities in the oil tank of Roots blower will affect the operation of the blower. At this time, we should lower the oil level or change the oil again.
2. Check the filter or muffler of Roots blower or high-pressure Roots blower. Filter or muffler blockage is a common reason for high fan operating temperature. If you want to remove it, just remove the blockage.
3. Check the impeller of Roots blower or high-pressure Roots blower. Excessive wear or clearance of the impeller will increase the operating pressure of the fan, causing the fan operating temperature to rise. At this time, the blades of Roots blower or high-pressure Roots blower should be adjusted or replaced.
4. Check the operating pressure of roots blower or high-pressure roots blower. Excessive operating pressure difference of the fan may also cause the operating temperature of the fan to rise. At this time, the pressure difference on both sides should be properly reduced to reduce the operating load of Roots blower.