How to conduct no-load and on load commissioning of Roots blower?

    Roots Blower During operation, the bearing must be checked frequently. Lubricating oil temperature in Roots blower equipment. Ammeter indication. When Roots blower needs cooling water, check whether the cooling water volume meets the specified requirements. If the fan has packing seal, check the leakage of the seal. If the leakage is serious, replace the seal immediately to avoid safety accidents caused by dangerous gas leakage, and the leakage of corrosive gas will also damage the bearing. During the operation of Roots blower, attention must be paid to the indication of the ammeter. In case of any abnormality, stop the blower immediately for inspection. Most of the reasons are caused by the friction of the impeller. Don't think that the Roots blower in operation doesn't need to be looked at. On the contrary, it should be looked at carefully. Otherwise, a little carelessness will cause damage to the blower and affect its normal use.