What should we do if Roots blower is stopped and restarted for a long time?

What should we do after a long-term shutdown and restart of Roots blower?

Generally, when customers purchase Roots blowers, they will have standby machines. Some standby machines will not be used after being used once or twice. However, if they are used again after a long-term shutdown, they need to do some recovery steps, otherwise they will easily cause machine failure.

When roots blower is not restarted for a long time, the following steps should be followed to reduce accidents:

① First, remove all plastic paper or oil paper from Roots blower.

② Then observe and measure the insulation resistance of the motor, which should be more than 1M Ω.

③ Follow other procedures, please refer to the corresponding startup commissioning steps.

Treatment method for long-term shutdown of Roots blower:

① Store at room temperature, not in damp rooms;

② Keep the parts of Roots blower well: wrap the controller, distribution box and other electrical equipment with plastic paper or oil paper to prevent moisture, dust and other invasion.

③ Dry storage: place the desiccant in front of the air filter and replace it every six months,

④ Sealing: close all openings to prevent moisture and dust from entering.

⑤ Check the appearance of roots blower and others: if there is any fault or problem before shutdown, it should be eliminated first for future use.

The above is the precautions for long-term shutdown and restart of Roots blower. If you don't understand anything, you can always consult Xinqianshun Roots blower manufacturer at 0531-83663588.