What are the operating conditions of Roots blower:

Roots blower is a positive displacement blower, which has the advantages of low noise, stable air flow, clean and oil-free exhaust gas, and is widely used in various fields. Recently, a customer asked about the operating conditions of Roots blower.

Firstly, the particles of the medium conveyed by Roots blower shall not be too large, the impurity content shall not exceed 100mg/m3, and the particle size shall not exceed half of the fan impeller clearance.

The second is that the bearing temperature and the temperature of the lubricating oil at the tooth end of Roots blower during operation shall not be higher than 100 ℃. If the temperature is too high, take cooling measures and install water cooling devices.

The operating pressure of the third roots blower shall not be higher than the rated pressure specified on the fan nameplate, otherwise the flow of roots blower will be reduced, the required air volume will not be reached, and the project progress will be affected

The operating ambient temperature of the fourth roots blower is between - 15 ℃ and 40 ℃. High medium temperature will cause abrasion of fan components and affect the service life of the fan.

Before using the fan, be sure to fully read and understand the operating instructions of the fan, and maintain the Roots blower according to the operating requirements. Proper maintenance and use can keep the fan in good operation and extend its service life.

The above is the service conditions of Roots blower summarized by the small editor. If you want to know more about Roots blower, pay attention to the small editor and continue to update your wonderful content