What are the main inspection tasks during the test run of Roots blower?

What are the main inspection tasks during the test run of Roots blower? The Roots blower needs to be checked in advance when it is being tested. Xinqianshun will give you a detailed summary of the checks that Roots blower needs to do when it is being tested. I hope the following can help you!

1. Check the bolts: ensure that the bolts have been locked, and the bolts are loose or fall off when the fan is running. At the same time, make sure that the base is not tilted and the fan is placed horizontally.

2. Check the running load: during the trial run and startup, ensure that the fan is started without load and cannot be loaded. Starting with load will damage the fan.

3. Check impurities: before commissioning, check whether there are impurities or sundries in the fan and piping, such as welding slag. At the same time, ensure that the piping is installed correctly without missing or wrong installation.

4. Check the oil quantity of lubricating oil: before starting the machine, confirm the oil quantity of lubricating oil to ensure that the oil mark is at the red line position of the oil indicating hole. Excessive lubricating oil will cause automatic drainage and oil leakage.

5. Check the operation of the motor: check whether the transmission between the motor and the head is normal, and check whether the motor shaft and the fan shaft are in a straight line.

6. Check the inlet and outlet pipes: ensure that the inlet and outlet pipes are unblocked to avoid blocking or air leakage.

7. Check the instrument: check whether the instrument is normal, and confirm whether the fan speed, current, voltage and other parameters are normal.

The above is the main inspection work during the trial run of Roots blower. These inspections help to ensure the normal operation of the fan, find and solve potential problems in time, and are important steps to ensure the long-term stable operation of the fan.