Application of Roots blower in environmental sewage treatment, power plant desulfurization and oxidation, and power plant pneumatic conveying:

Roots blower, as an important and widely used product in environmental protection, has been widely used in various fields of environmental protection:
 
1. It is used for sewage aeration in sewage treatment.
 
　　

Roots blower, as a kind of equipment that can provide compressed air, can send the air into the water depth of several meters, and send the air evenly to every corner of the sewage treatment pool through various aeration devices. In this way, bacteria used to treat and decompose organic matter have sufficient oxygen to survive and work continuously. According to different processes, the pressure of such roots blowers is generally 30-70kpa, and the final parameters are determined according to the site of use.
 
2. Oxidation fan in desulfurization system of power plant
 

In recent years, with the increasing attention of the state to environmental protection, more stringent requirements have been put forward on the sulfur content in the exhaust gas emissions of power plants to solve the serious acid rain problem. However, the desulfurization industry has also ushered in their spring. As the core equipment in the desulfurization system, Roots blower plays a very critical role in the normal operation of the entire desulfurization system. In the general desulfurization process, the waste is sent into the desulfurization tower through the flue, and the calcium oxide slurry is fed into the tower to fully react with the sulfur in the waste gas and finally become calcium sulfite. It is in this chemical reaction that a large amount of oxygen is required. The Roots blower is such a device that delivers a large amount of oxygen. In this use process, a large amount of air is required, The pressure of high pressure is generally 70-120kpa, which has certain requirements for the stability of the fan
 
3. Pneumatic conveying in ash removal in power plant
 

The power plant will produce a large amount of coal after the combustion of coal for power generation. If it is not well collected and utilized, it will cause great environmental pollution. Roots blower It plays a key role in such a fly ash collection process. It uses the principle of pneumatic transmission to transport fly ash to the ash bin with compressed air through the specified pipeline and collect it. The collected coal ash can be used as an important raw material for cement production, which not only solves environmental problems, but also creates economic benefits for the power plant, The pressure of roots blower for this kind of use is generally 50kpa.
The above is the industry information provided for you by Roots blower manufacturer. Thank you for your reading, we will continue to update, please continue to pay attention!

If you need to order, please inform us of the following items:
1. Use of blower: sewage treatment, aquaculture, pneumatic conveying, etc
2. Fan specifications: caliber, required air volume, pressure rise, etc
3. Transmission medium: air, gas, biogas and other corrosive gases
4. Equipment requirements: form, cycle number, voltage, single-phase or three-phase
5. Equipment service conditions: indoor or outdoor, ambient temperature
6. Fan accessories
7. Fan color (with or without specified color
8. Note: the allowable range of specified flow and pressure rise (vacuum degree) is ± 5%